Specially formulated for thermal stability and reduced friction, this Klotz four-stroke oil is available in 10W/30, 10W/40 and 15W/50.
Klotz Synthetic Lubricants, 260/490-0489
A distributor of fast-moving parts, BCS deals in product like oil filters, brake pads, chains, air filters, pistons, gaskets, luggage and much more.
A tilt-able motorcycle carrier that hitches to a frame-mounted 2" class III or better receiver hitch, the Tilt-a-Rack, distributed by ATV Solutions, is designed for transporting a wide range of off-road bikes. There are three models of Tilt-a-Rack to fit many unique requirements. Also ask about ATV Solutions’ Quad Rack.
ATV Solutions, Inc., 303/450-2881
Cobra ATV Windshield
Nearly twice as thick as some competitive windshields and offering hand and body protection, the Cobra is thermoformed from durable polycarbonate plastic and is virtually unbreakable. Exclusive breakaway design utilizes a four-point mounting system. 37”x22”.
The 512 Series is specifically made for utility ATVs, providing more ground clearance with heavier spring rates for load-carrying stability and handling. Adjustable preload settings.
Progressive Suspension, 877/690-7411
Web-Based OE Parts Ordering
World of Powrsports offers Web-based microfiche and parts diagrams that allow non-franchised dealers and repair shops the ability to order genuine OEM parts for Honda, Kawasaki, Yamaha, Suzuki, Triumph, Polaris, Arctic Cat, Bombardier, Sea-Doo, Ski-Doo, Cannondale and more.
World of Powersports, 800/340-7218
Galfer Wave rotors are laser cut and made of unique high carbon 420 stainless steel material that has been pre-heat treated and double disc grinded to assure perfect flatness and an efficient contact surface between pad and rotor. Allows for improved brake durability and affect in the mud.
Galfer Braking Systems, USA, 805/653-5012
Big Bore Kit
Wiseco’s all new 440cc big bore kit for the Suzuki-based motor in the Z400, DRZ400, KLX400 and KFX400 features forged 94.5mm pistons. Comes with a complete cylinder, top end gaskets, forged pistons, rings, pin and circlips. Available in compression of 13.5:1 or 12.5:1.
Wiseco Piston Co., Inc., 440/951-6600
Pro Series Hub Wheelset
Lightweight universal billet aluminum hubs with interchangeable drive and brake carrier ring adapters. Stainless steel 8-gauge spokes and spline driven aluminum nipples/ Sets include pre-fitting, lube-packed bearings, custom steel and dowel pins and a free spoke tool.
FTM Enterprises, 760/732-3161
Transform a Kawasaki Mule into a Safari-ready unit with 27-inch Surefoot tire kit, a two-seat heated cab with glass tip-up windshield, sliding rear window, lift-off doors, electric windshield wiper, dome light, bed extension, 17,500 BTU cab heater, body armor, 3,000-pound winch, sealed battery and storage locker or front basket. Many other options available.
Essex Mfg., 888/643-7739
Axles and Hubs
Includes lightweight billet and aluminum hubs, Flexible wheel width spacing. Unique design maximizes strength while minimizing weight. Available for Honda, Yamaha and Polaris.
Team Industries, Inc., 866/766-9288
UMI Racing has a full line of billet aluminum accessories for ATVs, including the Honda 400EX, Yamaha Banshee, Raptor and Warrior. Handlebars, gas caps, throttle covers, master cylinders, covers, motor mounts, chain guards, stator covers, shifters, air filter adapter, parking brake block-off and bar clamps.
UMI Racing, 480/951-9029
Banshee Billet Clutch Cover
Barnett’s billet clutch basket for the Yamaha Banshee is CNC machined from 2024 T3 billet aluminum and features stainless steel inserts where the clutch plate tabs contact the basket, virtually eliminating wear.
Barnett Tool and Eng., 805/642-9435
Back Country Pack
Outfitted with a 70 oz. hydration system, a tool compartment with 14 pouches, small storage pockets and a longer pocket for tools or a shovel, the Back Country Pack has waist and chest straps that distribute load to relieve shoulder stress.
Western Power Sports, 208/376-8400
FMF produces high-performance noise compliant exhaust components and systems for motocross, off-road, enduro, minibike or ATV enthusiasts, and the company has a broad range of handlebar control-related products.
FMF Racing, 310/631-4363
Dinli’s ATVs offer a 90cc motor with reverse, hydraulic disc brakes, a remote control safety device, turn signals and a number of other positive attributes for the smaller rider.
Dinli LP, 866/986-8886
The Carlisle line of ATV tires – the BadLands, TrailWolf, TurfTamer, AT489 and S-Trac – are domestically produced and available in a variety of sizes and designs. For both sport and utility.
Carlisle Wheel and Tire, 800/827-1001
Rack Receiver Mount
A universal mount for all ATV racks that allows for easy attachment of a variety of accessories, including an extension rack, dog box carrier, chainsaw mounts, water can carrier, bucket carrier, gas can carrier or boat rack.
CDS, Inc., 318/323-3416
ATV Logic’s Holds All ATV rack easily mounts to tubular racks, composite racks and handlebars. Constructed of black vinyl-dipped steel and can be bent to fit anything, including rifles, gun cases, small tools, large tools, lumber, chainsaws, etc.
Kwik Tek, 303/733-3722
Pivoting handlebar risers fit 7/8” or 1 1/8” bars. Billet mounts availble for Acerbis and PowerMadd handguards. Aluminum dash panels for select sport quads.
Braking CRF 450R
Braking’s non-floating rear wave rotor and single piston rear caliper eliminates overheating and brake fade on the CRF 450R. The new single-piston rear caliper features a stainless steel 25mm oversized piston. Comes with Braking SM15 pads, offering a 30% increase in pad surface area compared to the OE system.
Braking USA, LLC, 800/272-5342
Sparks Racing offers high-performance exhaust systems for sport ATVs. These exhaust systems have countless ATV national championships dating back to the early 1980s.
Curtis Sparks Racing, 661/872-4343
Kunz Engineering manufactures finish cut and rough cut self-contained pull-behind mowers with the product name AcrEase.
Kunz Engineering, Inc., 815/539-6954
These manuals provide easy-to-follow instructions that allow novice wrenchers and skilled technicians the know-how to service and repair machines.
Clymer Repair Manuals, 913/967-1984
Honda By Moose
The only ATV accessory line licensed by Honda, and scheduled for introduction in September, aftermarket product called “Honda by Moose Utility Division” is to include snowplows, cargo bags, bumpers and a wide variety of other gear.
Moose Utility Division, 800/569-1000
An ‘A’ rated nationwide insurer of motorcycles, ATVs and PWC, offering special programs for industry dealers and distributors. Ask about the special ATVline Insurance Program.
Markel American, 888/755-4ATV
Banshee Billet Power Head
An all new design head with changeable domes, proven on snowmobile race engines. Individual heads to assure cylinder sealant and ease of installation. Large volume water jackets to provide maximum cooling and a higher compression ratio.
D&D Powersports, LLC , 315/376-8013
Versa-ramps can be stored anywhere and can aid in loading just about everything. Unique hinge design allows the ramp to store flat.
Oxlite Manufacturing, 337/507-RAMP
Called the lightest, race-approved and street-legal helmets on the market, Suomy helmets come with a composite weave construction and variable resistance crush zones.
Gearbox International, 510/524-6939
Clarke Mfg. Co. says it’s the largest manufacturer in the world of aftermarket plastic fuel tanks. Over 120 styles available, including FastGas, Factory Plastic and Clarke brand names.
Clarke Mfg. Co., Inc., 503/829-2156
Kolpin designs and produces a wide array of accessories perfect for utility quad applications — gun boots and cases, soft and hard luggage, hunting blinds, etc.
Kolpin Outdoors, Inc., 920/928-3118
Bearings and Seals
Known for quality replacement bearings and seal replacement kits for ATVs and dirt bikes, Pivot Works deals in pre-packed Steering Stem Bearing Kits, Linkage Kits, Swingarm Kits, Wheel Bearing/Axle Carrier Bearing Kits, Shock Bearing Kits and A-Arm Kits. Available in the U.S. through 11 distributors.
Pivot Works, 515/402-8000v
Starting Line Products designs, manufactures and distributes high-performance parts and accessories for two and four-stroke ATVs. Products and services include high-output exhaust systems, reed valves, carb kits, brake components, engine porting, head modifications and more.
Starting Line Products, Inc., 208/529-0244